EasyManua.ls Logo

Endress+Hauser SS2100 - Storage; Disclaimers; Warranty

Endress+Hauser SS2100
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA02191C SS2100 H
2
S TDLAS Gas Analyzer
Endress+Hauser B-27
13. If returning the analyzer to the factory, complete the
Decontamination Form provided by Endress+Hauser “Service
Repair Order” on page B-25 and attach to the outside of the
shipping package as instructed before shipping.
Storage
The packaged analyzer should be stored in a sheltered environment that is
temperature controlled between -20
C (-4 F) and 50 C (122 F), and should
not be exposed to direct sun, rain, snow, condensing humidity or corrosive
environments.
Disclaimers
Endress+Hauser accepts no responsibility for consequential damages arising
from the use of this equipment. Liability is limited to replacement and/or repair
of defective components.
This manual contains information protected by copyright. No part of this guide
may be photocopied or reproduced in any form without prior written consent
from Endress+Hauser.
Warranty
For a period of 18 months from date of shipment or 12 months in operation,
whichever comes first, Endress+Hauser warrants that all products sold by it
shall be free from defects in material and workmanship under normal use and
service when correctly installed and maintained. Endress+Hauser’s sole liability
and Customer’s sole and exclusive remedy for a breach of warranty is limited
to Endress+Hauser’s repair or replacement (at Endress+Hauser’s sole option)
of the product or part thereof which is returned at Customer’s expense to
Endress+Hauser’s plant. This warranty shall apply only if Customer notifies
Endress+Hauser in writing of the defective product promptly after the
discovery of the defect and within the warranty period. Products may only be
returned by Customer when accompanied by a return authorization reference
number (SRO) issued by Endress+Hauser. Freight expenses for products
returned by Customer will be prepaid by Customer. Endress+Hauser shall pay
for shipment back to Customer for products repaired under warranty. For
products returned for repair that are not covered under warranty,
Endress+Hauser’s standard repair charges shall be applicable in addition to all
shipping expenses.

Table of Contents

Other manuals for Endress+Hauser SS2100

Related product manuals