Battery Charger RLD
User's Manual
5. Operation
PRELIMINARY CONTROLS
• Inspect the charger completey for loose screws, electrical connections or other damages;
• Check that all the ventilation slots are not obstructed to assure proper air flow;
• Make sure that the charger is installed as instructed in this manual and in accordance with
any applicable national or local norm.
OWM-AR-D-[] Page 15 of 23
WARNING !
DON'T connect the battery to the charger if the digital display is ON.
DON'T disconnect the battery from the charger while it is being charged.
ARCING AND BURNING OF CONNECTORS
OR BATTERY EXPLOSION MAY RESULT!