6/36
1. INTRODUCTION
This manual gives information about the commencement of operation, use and maintenance of
your newly purchased high frequency charger. Also included in this manual are a number of safety
instructions to create a safe working environment.
The high-frequency battery charger is an electronic device for professional use only, designed to
charge different types of batteries, depending on the firmware installed. This depends in part on the
application and the programmed software and may also be used as a power supply.
The difference with a traditional charger is that the high-frequency charger has extra parts with which
the mains voltage is first converted to a much higher frequency.
This is followed by a ‘traditional’ transformation, but at this frequency the transformer is much
smaller. This makes the high frequency charger much more compact and lighter than its traditional
counterpart.
Please read the manual thoroughly and observe the safety procedures before putting the unit into
operation. The operator and all persons who come into contact with the equipment should read it
carefully and regularly and have access to it at all times.
Keep this manual near the equipment and in a safe place for future reference!
Contact your dealer for any further questions or concerns you may have.
We hope you will enjoy working with your high frequency charger.
If you wish to use this high frequency charger in extreme conditions such as extreme heat,
extreme cold, extreme drought, etc. Please contact your dealer to discuss whether this
product is suitable for the activities you wish to undertake with the high frequency charger.
The high frequency charger may be unsafe if adequate maintenance is neglected. Therefore,
adequate maintenance facilities, trained personnel and procedures should be provided.
Maintenance and inspection shall conform to the following practices:
1. A scheduled planned maintenance, lubrication and inspection system should be followed
(see maintenance instructions chapter 7).
2. Only qualified and authorised personnel shall be permitted to maintain, repair, adjust and
inspect the high frequency charger.
3. Modifications and additions which affect capacity and safe operation shall not be
performed by the customer or user without the manufacturer’s prior written approval.
Capacity, operation and maintenance plates or decals shall be changed accordingly.
4. If modifications are made without written approval of the manufacturer, warranty will no
longer apply.
Any person in charge of putting the machine into operation, the operation itself or the
maintenance of the machine is urged to carefully read and observe the following instructions.
Make sure that the operators of this product are familiar with the safety instructions and follow
all the procedures. Neglecting these instructions can risk injury or death.
We guarantee a long period of trouble free operation if the unit is operated and maintained
correctly.
To Next Page
Loading...
