EasyManua.ls Logo

Energic Plus RX - Singlephase Charger Installation; Installation Conditions and Requirements; Installation Safety Precautions; Ventilation and Placement Guidelines

Energic Plus RX
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery Charger RX
User's Manual
4. Installation of the charger
Conditions of use:
Operating temperature: 5°C to 45°C
Storage temperature: -20°C to 60°C
Relative humidity: less than 75%
OWM-040906-RX Version: 02-AB Page 8 of 25
CAUTION !
The charger can be installed by qualified personnel only.
NOTE
This unit operates on 220-230-240 V AC, 50Hz.
Check that the unit's operating voltage is identical to your local power supply.
Check that the unit's maximum input power is available from your power supply.
CAUTION !
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Do not use the unit in presence of flammable gas, because it can be generate sparks.
CAUTION !
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
CAUTION !
Allow adeguate air circolation to prevent internal heat buildup.
Do not place the unit near materials that may block the ventilation slots.
Do not install the unit near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.

Related product manuals