Enfora MT 3000 - Accelerometer; GSM Radio

The following table describes the LED operation.
MT 3000 LEDs
OBD The OBD LED will flash at a fast rate when the unit is first connected to the OBD port for power.
Once a protocol is discovered through the OBD port, the LED will flash at a slow rate.
GSM The GSM LED will flash at a fast rate when the unit is finding cellular coverage. Once cellular
coverage is found, the LED shall flash at a slow rate. While the unit is transmitting, the LED is lit
continuously.
GPS The GPS LED will flash at a fast rate when the unit is acquiring a satellite fix. Once a fix is acquired,
the LED will flash a slow rate.
Table: 1 - MT 3000 LEDs
2.4 Accelerometer
The three-axis digital accelerometer provides the following features:
l Motion alert
l Driver behavior reporting
l Rapid acceleration
l Harsh braking
l Configurable thresholds
l Range settings
l Mode (Normal, Sleep, Wakeup)
l Device orientation setup
2.5 GSM Radio
The MT 3000 contains a quad-band (850/900/1800/1900 MHz) GSM radio.
l Class 4 (2W@850/900 MHz)
l Class 1 (1W@1800/1900 MHz)
The MT 3000 has an internal antenna limited to dual band.
-6-