Enfora MT 3000 - Figure: 20 - Verify GPRS Status

%CGREG: 0,1 (GPRS registered to home network)
Or
%CGREG: 0,5 (GPRS registered roaming.)
See Figure: 20 - "Verify GPRS Status"
Figure: 20 - Verify GPRS Status
Verify GPRS activation by sending the following command: AT$NETIP?<CR>
If the response is non-zero, then everything is working.
See Figure: 21 - "Verify GPRS Activation"
- 27 -