The ENFORCER SA-027WQ 7-Day Timer can be programmed to operate two Form C relays 24
hours a day on a weekly basis for various applications including security, access control, lighting,
and environmental control. Each relay can be programmed for up to 60 events with each event on
a weekly or daily schedule. A programmable holiday disables the timer for a single day weekly.
• Wide operating voltage range – 10~48 VDC, 12~24 VAC
• Two N.O. or N.C. Form C relays, 10A@14VDC, with one egress input per relay
• 60 Programmable events per relay (total of 120) set weekly, daily, or hourly, over a week
• Programmable holiday event – holiday from 1~31 days in duration
• EEPROM Memory for safe data protection in case of power failure
• No clock battery to replace - built-in super capacitor saves date/time 7-10 days after power loss
• Smart backup battery charger for external backup battery (not included) extends battery life
• Easy troubleshooting status checks – relay test, input voltage, backup battery voltage/charge
• Tandem mode allows both relays to operate simultaneously
• Passcode protection can be turned ON or OFF
• First-person-in (first-man-in, FM) function interrupts the normal operation of the timer
• Event outputs can be programmed to disable, ON, OFF, shunt, or momentary (1~99 seconds)
• Enable/Disable 1-hour offset as a quick setting during Daylight Savings Time
• Alphanumeric white backlit LCD display for easy programming
7-Day Timer
SA-027WQ
Installation Manual
Need help?
To Next Page
General