Engcon DC2 User Manual

3 Operation
3.2. Activation sequence
Can be operated immediately after the programming sequence without releasing the
button.
1. Hold down the constant flow button; selected functions are activated with the
programmed speed and direction.
2147270
2. After 3 seconds a buzzer will sound in the DC2 cabin module. If the operator releases
the button within 2 seconds after the audible signal (buzzer in the DC2 cabin module will
sound during these 2 seconds):
- The constant flow functions are activated.
- The audible signal is activated.
10

Engcon DC2 Specifications

General

Brand	Engcon
Model	DC2
Category	Controller
Language	English