Engcon DC2 User Manual

3 Operation
Check that constant flow is functioning (e.g. that the rotating brush is rotating).
Check that the indicator lamp is on.
1
8
1
9
16
2
2155148
Position
Description
1
Constant flow indicator lamp in the joystick button with LED. Same as the button
selected for constant flow activation.
2
Indicator lamp that lights up when constant flow is activated installed in a conspicuous
place in the cab
IMPORTANT
If the button is not released within 2 seconds, the constant flow
function will start and the activation sequence must then be
restarted.
WARNING
Beware of moving parts. A lack of awareness may lead
to crush injuries. Risk of personal injury.
CAUTION
If constant flow is activated without activating a
function, the tiltrotator or tool may start unexpectedly
without any controls having been moved.
3.3. Deactivation of constant flow
Constant flow is deactivated for all activated functions should any of the below occur:
- Any of the constant flow functions is activated manually by a button or roller (e.g. if
Extra1 on the roller is moved, constant flow is deactivated).
11

Engcon DC2 Specifications

General

Brand	Engcon
Model	DC2
Category	Controller
Language	English