1 Introduction
1.4. Product approval
1.4.1. Declaration of Incorporation
The declaration refers to the engcon DC2 control system.
Upon reasoned request by a national authority, engcon will undertake to provide relevant information about the
machine.
The control system may not be put into operation before the machine it will be built into is in conformance with
Directive 2006/42/EG.
engcon hereby declares that the control system conforms to the below-mentioned basic safety requirements
as described in appendix 1, items1 and 3, in Directive 2006/42/EG, and that the relevant documentation as
described in appendix 7, section B has been compiled.
We hereby declare that the control system conforms with 2014/30/EC and 2006/42/EC.
Safety of machinery – Safety-related parts of control systems –
Part 1: General principles for design
Safety of machinery – General principles for design – Risk
assessment and risk reduction
Earth-moving machinery – Safety – Part 1: General
requirements
Earth-moving machinery – Safety – Part 5: Requirements for
hydraulic excavators
Safety of machinery – Electrical equipment of machines – Part
1: General requirements
Earth-moving machinery – Machine-control systems (MCS)
using electronic components – Performance criteria and tests
for functional safety
Construction machinery – Electromagnetic compatibility of
machines with internal power supply
Stig Engström, CEO
Qualified person authorized to compile the technical documentation:
Peter Huczkowsky, CIO & Head of Control Systems
engcon Control Systems
5
To Next Page
Loading...
Need help?
General
