5 Operation
5.9.4. Disconnecting the tool, mechanical
lock
1. Place the tool on the ground, with the locking bolts
pointing away from the cab.
2. Open the quick hitch lock with a suitable tool.
On models with a screw, turn it anti-clockwise until
the locking bolts engage and the indicator rod is in its
outermost position.
On models with a lever, use an extension pipe and move
the lever to its end position. The Indicator rod will then be
in its outermost position and the lock clamp will keep the
locking bolts open.
In this position the tool is free !
3. The locking bolts are now in the open position and the
tool is free. Carefully raise the tiltrotator from the tool.
5.10. Fitting and setting up quick hitch locks
DANGER
Check the attachment points regularly and be alert for
the formation of cracks. Risk of personal injury and
damage to property.
32
To Next Page
Loading...
