Engcon SG09 - On Completion

4 Installation
4.4. On completion
Affix the warning decal supplied in a conspicuous place
that does not distract the operator.
WARNING
Replace damaged or
illegible signs and
decals before using
the machine. Risk of
personal injury and
damage to property.
2. Carry out function checks:
Figure 4.
- Run all the tool functions a few times to remove any air
from the system. Important for preventing uncontrolled
movement.
- Make sure the tool operates when the hydraulics are
running.
- Check that the hoses are not subjected to pinching,
cutting or stretching.
12