Engcon SG09 - Special Maintenance; EC-Oil

6 Maintenance
WARNING
Always make sure the latches protrude as specified
for the quick hitch concerned. The tool may only be
used if locking is correctly completed.
WARNING
Welding is not permitted. It can have a negative
impact on safety. Risk of personal injury and damage
to property. For welding, contact your dealer or
engcon Nordic AB.
WARNING
Replace damaged or illegible signs and decals before
using the machine. Risk of personal injury and
damage to property.
6.3. Special maintenance
6.3.1. EC-Oil
Cleaning
- Clean oil connections, electrical
connectors, grease connections and dirt
guards before and after use in order to
avoid oil or grease leakage and safeguard
EC-Oil function.
- If oil or grease leakage occurs despite
cleaning, we recommend face seal
replacement.
- Clean electrical connectors daily and
spray with water repellent.
Figure 5. Bildtext
17