EnGenius EOC5611P Quick Start Guide

EOC5611P is a long range outdoor wireless Access Point / Client Bridge
that operates in both 5GHz and 2.4GHz frequency. It provides high
bandwidth up to 54Mbps and features dual polarizaon antenna with
high transmied output power as well as superior sensivity.
EOC5611P extends radio coverage, avoids unnecessary roaming
between Access Points and ensures a stable wireless connecon while
reduces the number of required equipments.
EOC5611P provides user friendly interface including user friendly
distance control ranges from 1KM up to 30KM and RSSI LED indicator
offering real me signal status. It comes with PoE injector for
convenient outdoor installaon.
EOC5611P enforces transmission security with full support of latest
encrypon mechanism including 64/128/152-bit WEP, WPA and WPA2.
With 13dBi internal antenna and superior performance, EOC5611P
makes an opmal wireless soluon for both small and large scale
projects.
IP Address Configuraon
The default IP address of the device is
192.168.1.1. In order to log into this device, you
must first configure the TCP/IP sengs of your
PC/Notebook.
1. In the control panel, double click Network
Connecons and then double click on the
connecon of your Network Interface Card
(NIC). You will
then see the following
screen.
2. Select Internet Protocol (TCP/IP) and then
click on the Properes buon. This will
allow you to configure the TCP/IP sengs
of your PC/Notebook.
3. Select Use the following IP Address radio
buon and then enter the IP address
(192.168.1.21) and subnet mask
(255.255.255.0). Ensure that
the IP address
and subnet mask are on the same subnet as
the device.
4. Click on the OK buon to close this window,
and once again to close LAN properes
window.
Logging In
1. To configure the device through the
web-browser, enter the IP address of the
Bridge (default: 192.168.1.1) into the
address bar of the web-browser and
press Enter.
2. Aer connecng to the IP address, the
web-browser will display the login page.
Specify admin as the default User Name
and Password, and then click on the Login
buon.
Administraon
1. Click on the Administraon link under the
Management secon. This opon allows
you to create a new user name and
password for the device. For security it is
highly recommended for security reasons.
0.1.v ediuG tratS kciuQ
snoitcurtsni etelpmoc rof launaM s’resU ot refeR1
Quick Start Guide >>
Wireless Access Point．Client Bridge
E
O
C
5
6
1
1
P
．
8
0
2
.
1
1
a
/
b
/
g

EnGenius EOC5611P Specifications

General

Brand	EnGenius
Model	EOC5611P
Category	Wireless Access Point
Language	English