EnGenius ETR9350 - Page 28

27
PPTP WAN Interface Settings
WAN Interface Type:
Select whether the ISP is set to Static IP or Dynamic IP addresses.
Hostname:
This is optional. Only required if specified by ISP
MAC:
The MAC Address that is used to connect to the ISP.
PPTP Settings
Login:
Username assigned to you by the ISP
Password:
Password for this username.
Service IP Address:
The IP Address of the PPTP server.
Connection ID:
This is optional. Only required if specified by ISP
MTU:
The maximum size of packets.
Do not change unless mentioned by the ISP.