EnGenius ETR9350 - Page 66

65
Basic
Radio:
Enable or Disable the device’s wireless signal.
Mode:
Select between Access Point or Wireless Distribution System (WDS) modes.
Band:
Select the types of wireless clients that the device will accept.
eg: 2.4 Ghz (B+G)
Only 802.11b and 11g clients will be allowed.
Enable SSID#:
Select the number of SSID’s (Wireless Network names) you would like.
You can create up to 4 separate wireless networks.
SSID#
Enter the name of your wireless network. You can use up to 32 characters.
Auto Channel:
When enabled, the device will scan the wireless signals around your area and
select the channel with the least interference.
Channel:
Manually select which channel the wireless signal will use.
Check Channel Time:
When Auto Channel is Enabled, you can specify the period of the device will
scan the wireless signals around your area.