EnGenius ETR9350 - Page 77

76
Wireless Filter
Enable Wireless Access
Control:
Tick the box to Enable Wireless Access Control.
When Enabled, only wireless clients on the Filtering Table will be allowed.
Description:
Enter a name or description for this entry.
MAC address:
Enter the MAC address of the wireless client that you wish to allow
connection.
Add:
Click this button to add the entry.
Reset:
Click this button if you have made a mistake and want to reset the MAC
address and Description fields.
MAC Address Filtering Table
Only clients listed in this table will be allowed access to the wireless network.
Delete Selected:
Delete the selected entries.
Delete All:
Delete all entries
Reset:
Un-tick all selected entries.