9.3.
Storage
If you want to dismantle easyWallbox and keep it for future use, use the
f
ollo
win
g
precautions to maintain
its
oper
abilit
y
:
⚫ clean the device well before storing
⚫ put the clean device into the original packaging or suitable clean
and dry material
⚫ follow the storage conditions:
-
the temperature of the place where the device is stored must be
between -25°C and +40°C
-
the average temperature over 24 hrs must not exceed 35°C
-
the relative air humidity must not exceed 95% and condensation
must not form.
10.
DISPOSAL
10.1.
Disposal of the packaging
Dispose of the packaging in an environmentally friendly manner. The
materials used for the packaging of this product can be recycled and
must be disposed of in compliance with the legislation in force in the
country of use.
10.2.
Taking out of service and disposal of easyWallbox
This appliance is labelled in accordance with European Directive
2012/19/EU concerning used electrical and electronic appliances (waste
electrical and electronic equipment – WEEE). The guidelines determine
the framework for the return and recycling of used appliances as
applicable throughout the EU.
Further information about current disposal facilities can be obtained
from local authorities.
11. ASSISTANCE
If
y
ou
ha
v
e an
y
questions
about
th
e
installation
of
e
as
yW
allbo
x
,
c
onta
c
t
the authorised assistance centre. Various assistance centres available to
customers can be found on www.easyWallbox.eu
Refer to the authorised assistance centre for any questions on the use of
e
as
yW
allbo
x
.
Support will be provided by ENGIE EPS through land-line in the local
lan
guage
,
f
or
th
e
f
ollo
win
g
c
ountr
ies:
Land-line: 8:00 a.m. - 8:00 p.m. from Monday to Saturday
If you contact ENGIE Eps assistance, please have the following
information available, as shown in chapter 3.2:
⚫ name of the model;
⚫ serial number.
To Next Page
Loading...
