Need help?Do you have a question about the ENGIE EPS easyWallbox and is the answer not in the manual?
Explains how to install easyWallbox in Mode 2 up to 32 A, complying with IEC 61851-1:2017.
Lists critical safety warnings regarding electric shock and fire hazards.
Specifies that easyWallbox is for fixed mounting to charge electric vehicles with Type 2 connectors.
States that non-compliant use or unauthorized modifications are unacceptable and void liability.
General safety instructions for installation and use.
Explains the DPM function that modulates charging power to prevent blackouts.
Provides guidelines on selecting an appropriate location for wall mounting the easyWallbox.
Explains the process of physically mounting the easyWallbox onto the wall.
General| Power Output | Up to 7.4 kW |
|---|---|
| Connector Type | Type 2 |
| Protection Rating | IP54 |
| Mounting | Wall-mounted |
| Type | Wallbox |
| Input Voltage | 230 V AC |
| Charging Cable Length | 5 m |
| Communication | Wi-Fi, Bluetooth |
| Protection | Overcurrent, overvoltage, short circuit |
| Operating Temperature | -25°C to +50°C |
| Compatibility | Electric vehicles with Type 2 connector |
To Next Page
