2.3.
Essential safety instructions
easyWallbox was designed, built and checked in compliance with the
current safety regulations. Installation of easyWallbox in Mode 2 with
Power Upgrade can only be made by qualified personnel able to
understand and carefully follow these instructions and evaluate and
understand all related risks. ENGIE Eps does not assume any liability
for damage to persons or things that may arise from failure to respect
the safety regulations and the instructions in this manual.
2.3.1. Respect for local conditions
The operational safety of easyWallbox depends on its correct installation
which must respect current legislation.
2.3.3.
Regulatory status
easyWallbox must be maintained intact. If there is any damage or
defects, users run the risk of serious injury caused by electric shocks.
Th
eref
or
e,
f
ollo
w
th
e instructions belo
w
:
⚫ avoid knocking the device
⚫ avoid use not in accordance with the intended purpose
⚫ avoid incorrect use of the device
⚫ clearly indicate the malfunction of the device so that other people
will not use it
⚫ ask for the prompt intervention of qualified personnel to repair
damage or defects
2.3.2. Respecting the supervision requirement
Children and people not able to evaluate, even momentarily, the possible
risks arising from the incorrect use of easyWallbox must be kept away from
the device and the charging cable, both when in use and non-operational.
To Next Page
Loading...
