ENGIE EPS easyWallbox - Page 2

GB
GB
2
3
INDEX INDEX
SECTION PAGE SECTION PAGE
1. ABOUT THE INSTALLER MANUAL 4
1.1. About installation in Mode 3
5
1.2. Assistance
5
1.3. Symbols used
5
1.4. Warnings
6
2. SAFETY
8
2.1. Intended purpose of easyWallbox
8
2.2. Use not in accordance with the intended purpose
9
2.3. Essential safety instructions 10
2.3.1. Respect for local conditions 10
2.3.2. Respecting the supervision requirement 10
2.3.3. Regulatory status 11
3. PRODUCT DESCRIPTION 12
3.1. General description 12
3.2. Identification label 15
3.3. Technical features 16
3.4. Dynamic Power Management 17
3.5. Product versions country by country 18
4. INSTALLATION 18
4.1. Choice of position 19
4.2. Acceptable environmental conditions 20
4.3. What’s inside 21
4.4. Opening the package 22
4.5. Wall mounting 23
4.6. Mode 2 plug removal 26
4.7. Socket and Plug installation instruction 28
4.8. Power supply connection 28
4.9. Installation of sensor for Dynamic Power Management
(optional step) 30
4.10. Setting the rotary switch 32
4.11. Case reassembly 33
4.12. Configuration via easyWallbox Up! (service app) 34
5. FIRST START 36
5.1. Turning on easyWallbox 36
5.2. Configuration through the My easyWallbox app
(only for users) 37
6. CHARGING PROCEDURE 38
6.1. LED status indicator 39
7. STOP CHARGING 40
7.1. Charging process completion 41
8. MAINTENANCE 42
8.1. Ordinary maintenance intervals 43
9. DISMANTLING AND STORAGE 44
9.1. Disconnection from the power supply – Mode 3 44
9.2. Removal of the device from the wall 44
9.3. Storage 48
10. DISPOSAL 48
10.1. Disposal of the packaging 48
10.2. Taking out of service and disposal of easyWallbox 48
11. ASSISTANCE 49
DISCLAIMER 50