ENGIE EPS easyWallbox - General Safety Warnings; Electric Shock and Fire Hazards

GB
GB
6
7
1.4. Warnings
Danger of electric shock and fire
⚫ Bef or e usin g e as yW allbo x , r e a d th e c ont ents of this manual car efully to
acquire familiarity with the instructions for use and the safety indications.
⚫ Before starting installation, ensure that easyWallbox is not connected
to any power supply . Any installation, maintenance and dismantling
operation should only be done when disconnected from the power
supply.
⚫ Before connecting to a power supply, make sure that the electric
soc k et is installed cor rec tly , with a proper e ar th c onnec tion an d in
compliance with local and international standards.
⚫ Before installing or using the device, make sure that no damage
has oc curr ed t o an y c ompon ent . Dama ged compon ents can le a d
to electrocution, short circuits, and fire due to overheating.
A device with damage or defects must not be used.
⚫ Install easyWallbox away from petrol cans or combustible
substan c es i n g ene ra l .
⚫ Before carrying out any maintenance operation, ensure that the
power supply is off.
⚫ Before installing easyWallbox in Mode 3 or Mode 2 with Power
Upgrade, make sure that the power supply in use is switched off
on the service panel.
⚫ Bef or e put tin g b a c k or m o vin g e as yW allbo x , ensure that th e de vic e
is not attached to the power supply .
⚫ Use of easyWallbox must be limited to the specific applications it is
intended for.
⚫ Installation, maintenance, or repairs not made correctly may lead to
risks for the user . Please ensure that easyWallbox is only used in the
correct operating conditions .
⚫ The device must be connected to a power supply compliant with
all th e t echnical r equir em ents in dicated in this manual .
⚫ Children or other persons not able to evaluate risks related to the
installation or use of the device might be seriously injured or risk
their own lives. Such persons must not operate the device and must
be supervised when close to it.
⚫ Pets or other animals must be kept away from the device and
packaging material.
⚫ Childr en must n ot pla y with th e de vic e , th e a cc essories or th e
packaging provided with the product.
⚫ easyWallbox does not contain components that the user can
repair or maintain autonomously.
⚫ The only part that can be removed from easyWallbox is the aesthetic
cover , just during the installation and dismantling phases and
following the instructions. easyWallbox should not be opened
further unless by qualified personnel during installation, dismantling
or maintenance.
⚫ The power supply to easyWallbox must be installed on a dedicated
thermal-magnetic miniature circuit breaker (MCB) mounted in
the service panel to protect the electrical circuit. When dimensioning
the circuit breaker, the higher ambient temperatures in the control
cabinet must also be taken into account.
⚫ easyWallbox can only be used combined with an energy source.
⚫ easyWallbox must be treated and disposed of in compliance with
current legislation , separately from normal household waste as
electric and electronic waste (WEEE).
Always switch off power before carrying out any maintenance
Before installing easyWallbox, make sure that the power supply
used is switched off on the service panel.