Page 24
Omniguard Cellular™ Owner’s Manual
Page 25
Engineering Solutions Inc
Section 5: Accessories
Remote Auxiliary Alarm
The Remote Auxiliary Alarm is a combination high-intensity strobe
light and 95db audible alarm on a 25 foot cable that connects to the
Omniguard USB connector using the optional USB Port Adapter. The
Remote Auxiliary Alarm plugs into the Aux Alarm port on the USB
Port Adapter which in turn is connected to the USB port using the
USB cable (included with the Omniguard).
In an alarm condition, the Remote Auxiliary Alarm will activate. It may
be muted by touching the
icon. The Remote Auxiliary Alarm will
only re-arm once the unit has returned to normal operation.
Telephone Autodialer
The Telephone Autodialer is supplied with a 25 foot cable that connects
to the Omniguard USB port using the optional USB Port Adapter. The
Telepho ne Autodialer pl ugs into the Autodialer port on the USB Port
Adapter which in turn is connected to the USB port using the USB
cable (included with the Omniguard). The Autodialer also requires a
working land line telephone connection box with an RJ11 jack.
In an alarm condition, the Autodialer will call the pre-programmed
phone numbers (up to 4) and play a pre-recorded message alerting
the off-site personnel of an alarm condition at the job site.
The Autodialer only activates once in a given time period (5, 10 or 15
minutes – the Message Rate setting). This prevents the Autodialer
from calling more than once if there are multiple alarms occurring
within a short period of time. After the 5, 10 or 15 minute period has
elapsed, the Autodialer will dial out again if the unit is still in an alarm
condition or when the next alarm condition occurs.
Cellular Wireless Modem for non-Verizon Wireless
NetworksBy using the optional Cellular Wireless Modem and USB
Port Adapter, the Omniguard Cellular can access cellular wireless
networks other than Verizon to automatically send alarm and job
reports to cell phones and email accounts. In addition, the Omniguard
can respond to requests for information from wireless cell phones
and via e-mail.
Wireless communication requires a specially configured MultiTech
MultiModem cellular wireless modem. This modem is similar to a
cell phone. It has a phone number and requires an active cell phone
account with SMS texting support, using either a traditional plan with
monthly payments or a prepaid plan. Contact Engineering Solutions
for more information on acquiring a cellular wireless modem.
JOB: Job A
20:38 0.000 0.000
Omniguard: # C501234
Normal
Job A
BATTERY POWERED
BATTERY 97%
Omniguard: #
C501234
JOB: Job A
AC POWERED
BATTERY 10%
Omniguard: #
C501234
Power Change
Waiting for Pressure
JOB: Job A
STATUS: Waiting Pressure
PRESSURE: 0.079" WC
Omniguard # C501234
** ALARM **
JOB: Job A
ALARM 1: 0.040" WC 15:19:11
0.045" WC Omniguard: # C501234
Alarm
You will be receiving Logs Messages
for job “Job A.”
Omniguard # C501234
Status Messages:
Job Log Test
Test Messages:
Status Message Test
You will be receiving Status
Messages from this Omniguard.
Omniguard # C501234
E-mail Message Examples
To Next Page
Loading...