Omniguard Quick Reference
Screen Icons
Starting A New Job
1. Check the Time & Date, set if necessary.
2. Check the settings for Alarm 1 & 2 (operating window), adjust if necessary.
3. Touch START JOB at the bottom of the Home screen.
4. Enter the Job Name using the on-screen keyboard.
5. Connect pressure tubing to the inlet nozzle.
The Omniguard will display WAITING FOR PRESSURE until the containment
pressure reaches the operating window. Once reached, status changes to
NORMAL and a green border appears on the screen. The Omniguard begins
logging & printing pressure readings.
1201 Monster Rd SW, Suite 240, Renton, WA USA 98057
(206) 241-9395 • (206) 241-9411 fax • www.omniguard.com
ENGINEERING
SOLUTIONS
INC
Home Screen
Main Menu
Alarm Settings Screen
Tutorial Screen 1
Tutorial Screen 2
Item specifi c Help or
Help menu
Return/Exit
Main Menu
Scroll thru menu, Job
Logs, reports or Help
Omniguard now has a Touchscreen!
- touch the screen icons & settings to
view & change settings.
- view & print Job Logs and reports.
- colored screen border indicates job
monitoring status:
green = good
yellow = approaching alarm
red = alarm
Arm/disarm/mute
audible alarm
Alarm 1&2
Settings.
Battery life remaining
& charging status
Monitoring Status:
Printer Settings
Off
Off
(batt power)
Paper Jam
START JOB
WAITING FOR PRESSURE
NORMAL
APPROACHING ALARM
ALARM
Network Connectivity Settings
Cellular Modem
connected.
Cellular Modem
error - not activated or
network not detected.
Cellular Modem off.
WiFi connected
with full signal
WiFi error - can
not connect to wifi
network
WiFi ON - No Wifi
log in informaiton,
or no signal in
range
To Previous Page
Loading...
