Enovation Controls MURPHY PowerCore TEC-10 - Page 27

Software Release: [App: 02.09.10051.00; Config: 2.9.20024; Built in PowerVision Configuration Studio Version: 2.9.23042;
BTL: 02.09.10015.00]
Section 40 27 00-02-0939
2019-06-13
JCB – DPF Emissions Filter Above 90%. Engine Overloaded
JCB – DPF Emissions Filter at 100%. Engine Plugged
JCB – Inducement Level 2,3 or Final.
Displays when an active or unacknowledged warning fault exists. The
icon will disappear if the fault is acknowledged and is no longer active.
Displays when an active or unacknowledged shutdown fault exists. The
icon will disappear if the fault is acknowledged and no longer active.
Gear Box Pressure
Fuel Rate
Fuel Level
Pump Flow Rate
Engine Oil Level
Discharge Pressure
Current Oil Pressure
Current RPM
Ambient Temperature
Oil Temperature
System Level