Software Release: [App: 02.09.10051.00; Config: 2.9.20024; Built in PowerVision Configuration Studio Version:
2.9.23042; BTL: 02.09.10015.00]
Section 40 3 00-02-0939
2019-06-13
The MPC-10 can be set as an Auto-Start Controller. Please be cognizant at all times of
hands and other objects that are in close proximity to the machine(s) being controlled as they
may commence operation suddenly and without warning.
LENS CLEANING PROCEDURES
The lens on the MPC-10 and TEC-10 is composed of
Polycarbonate materials. Use only mild soap and
water to clean the lens/display window. Evidence of
improper cleaning techniques or chemicals includes
cracks, smear marks, scratches, or fogged/hazy
lenses.
To Next Page
Loading...
Need help?
General
