Enovation Controls Murphy PowerView PV380-R2 - Page 42

00-02-0997 43 2016-06-15
3 – Stability Optimized for driveline
engaged and/or in lockup
condition 2 (PTO driveline)*
*(The above descriptions taken
from SAE International document
J1939-71 May2012)
897 (Override
Control Mode
Priority)
0 – Highest Priority
1 – High Priority
2 – Medium Priority
3 – Low Priority
3349 (TSC1
Transmission
Rate)
0 – 1000 mS
1 – 750 mS
2 – 500 mS
3 – 250 mS
4 – 100 mS
5 – 50 mS
6 – 20 mS
7 – 10 mS