enphase IQ System Controller 3M - Compatibility

5
IQ System Controller 3M quick install guide
Compatibility
SYSTEM
CONTROLLER
MICRO
INVERTER
COMBINER
LOAD
CONTROLLER
COMMS-KIT-
CK
PRODUCTION CT
CT--SOLID
IQ METER COLLAR
MCV
BATTERY CT
CT--SPLIT
OR CT--CLAMP
IQ System
Controller 3M
IQ8 or
Q7/IQ6
Series
IQ Combiner
5/5C
Recommended
one or two units
Integrated into
IQ Combiner
5/5C
One unit included
with
IQ Combiner 5/5C
1
One IQ Meter
Collar (mandatory
with IQ System
Controller 3M)
One unit included with
IQ Combiner 5/5C
IQ System
Controller 3M
IQ8 or
IQ7/IQ6
Series
IQ Combiner
4/4C
Recommended
one or two units
Order one unit
of COMMS-
KIT-02
One unit included
with
IQ Combiner 4/4C
1
One IQ Meter
Collar (mandatory
with IQ System
Controller 3M)
One unit is included
with COMMS-KIT-02
IQ System
Controller 3M
IQ8 or
IQ7/IQ6
Series
IQ Gateway
Recommended
one or two units
Order one unit
of COMMS-
KIT-02
One unit included
with the
IQ Gateway
1
One IQ Meter
Collar (mandatory
with IQ System
Controller 3M)
One unit is included
with COMMS-KIT-02
*FOR RETROFITS, PURCHASE AND INSTALL CONSUMPTION CTS IF NOT PRESENT ON SITE.
1
If PV is connected to the DER port:
• Additional Production CT may need to be purchased to capture L1 lines of PV landing on both the IQ Combiner port and DER port in the
IQ System Controller 3M,
OR
• The existing Production CT in the IQ Combiner 5/5C, IQ Combiner 4/4C, or IQ Gateway can also be extended
into the IQ System Controller 3M and used to capture L1 lines of PV landing on the PV and the DER port.
NOTE: Revenue grade ANSI C12.20 Class 0.5 compliant metering accuracy is not supported when extending PV Production CT.