EasyManuals Logo

Enraf Nonius Sonopuls 490 Operating Instructions

Enraf Nonius Sonopuls 490
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
47
The maximum current amplitude within the specification is achieved up to a load of 500 Ω (CC).
Surge program
With some current waveforms a surge program is available.
The parameters and their range are as follows:
Ramp-up time : 0 - 9 s, in steps of 1s
Hold time : 0 - 60 s, in steps of 1 second
Ramp-down time : 0 - 9 s, in steps of 1s
Interval time : 0 - 120 s, in steps of 1 second
Delay time : 0.1 - 80 s, below 10s in steps of 0.1s, otherwise in steps of 1s
Interferential, 4 polar
Carrier Frequency : 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10 kHz
Beat Frequency (AMF) : 0 – 200 Hz in steps of 1 Hz
Frequency Modulation (spectrum) : 0 - 180 Hz in steps of 1 Hz
Modulation program : 1/1, 6/6, 12/12, 1/30/1/30 s
Amplitude : 0 - 100 mA
Isoplanar vector
Carrier Frequency : 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10 kHz
Beat Frequency (AMF) : 0 – 200 Hz in steps of 1 Hz
Frequency Modulation (spectrum) : 0 – 180 Hz in steps of 1 Hz
Modulation program : 1/1, 6/6, 12/12, 1/30/1/30 s
Amplitude : 0 - 100 mA
Dipole Vector Automatic
Carrier Frequency : 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10 kHz
Beat Frequency (AMF) : 0 – 200 Hz in steps of 1 Hz
Amplitude : 0 - 100 mA
Rotation time : 1 - 10 s in steps of 1 s
Dipole Vector Manual
Carrier Frequency : 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10 kHz
Beat Frequency (AMF) : 0 – 200 Hz in steps of 1 Hz
Frequency Modulation (spectrum) : 0 – 180 Hz in steps of 1 Hz
Modulation Program : 1/1, 6/6, 12/12, 1/30/1/30 s
Amplitude : 0 - 100 mA
Resolution vector : 2.25° per step (160 steps over 360°)
Asymmetrical
Phase Duration : 10 - 400 µs in steps of 5 µs
Pulse Frequency : 1 - 200 Hz, in steps of 1 Hz
Frequency Modulation : 0 – 180 Hz, in steps of 1 Hz
Modulation Program : 1/1, 6/6, 12/12, 1/30/1/30 s
Surge Program : Yes
Amplitude : 0 - 140 mA
Asymmetrical Alternating
Phase Duration : 10 - 400 µs in steps of 5 µs
Pulse Frequency : 1 - 200 Hz, in steps of 1 Hz
Frequency Modulation : 0 – 180 Hz, in steps of 1 Hz
Modulation Program : 1/1, 6/6, 12/12, 1/30/1/30 s
Surge Program : Yes
Amplitude : 0 - 140 mA
Burst Asymmetrical
Phase Duration : 10 - 400 µs in steps of 5 µs
Pulse Frequency : 1 - 200 Hz, in steps of 1 Hz
Burst Frequency : 1 – 9 Hz, in steps of 1 Hz
Amplitude : 0 - 140 mA
Burst Asymmetrical Alternating
Phase Duration : 10 - 400 µs in steps of 5 µs
Pulse Frequency : 1 - 200 Hz, in steps of 1 Hz

Table of Contents

Other manuals for Enraf Nonius Sonopuls 490

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Enraf Nonius Sonopuls 490 and is the answer not in the manual?

Enraf Nonius Sonopuls 490 Specifications

General IconGeneral
BrandEnraf Nonius
ModelSonopuls 490
CategoryMedical Equipment
LanguageEnglish

Related product manuals