28
NOWPAK LINER-BASED CANISTER SYSTEM
User Manual | Entegris, Inc.
APPENDIX A: REQUIRED TOOLS
—
Entegris provides the following specialized tools for filling, operation, and maintenance of the liner-based
canister system.
Contact Entegris at +1 978 436 6500 to order these tools.
TOOL PART NUMBER
Torque wrench
(1/2” drive)
NA-18 (4- to 40-liter)
NA-33 (⁄" drive with ⁄" adapter,
4- to 40-liter) for use with NC-W2
polypropylene closure
NA-92 (200-liter)
Torque adapter tool
NA-10 (4- to 40-liter with
two-piece NC-03 or NC-04-type
aluminum closure)
NA-03 (20-liter with
one-piece NC-W2 polypropylene
closure)
DA-06 (200-liter)
CONTAINER SIZE
TORQUE WRENCH TO OPEN AND
CLOSE CANISTER CLOSURE USED WITH THIS TORQUE ADAPTER TOOL
4- to 40-liter (with
two-piece closure)
NA-18 NA-10
4- to 40-liter (with
one-piece closure)*
NA-33 NA-03
200-liter
NA-92 DA-06
Diptube removal tool
NA-13
* Either the NA-33 or the NA-18 may be used to torque the NC-W2 polypropylene closure.
To Next Page
Loading...
