Need help?Do you have a question about the Enterasys 08G20G4-48P and is the answer not in the manual?
General| Model | 08G20G4-48P |
|---|---|
| Ports | 48 |
| Uplink Ports | 4 |
| Power over Ethernet (PoE) | Yes |
| PoE+ | Yes |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Weight | 24.3 lbs |
| MAC Address Table Size | 32K |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| VLAN Support | Yes |
| Layer 3 Routing | Yes |
| Type | Switch |
| Layer | Layer 2/3 |
| Management | CLI, SNMP |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supply | AC 100-240V |
Details features like redundant power, management, and configuration interfaces.
Covers prior considerations, required tools, and unpacking steps.
Guides for installing the switch on a flat surface using rubber feet.
Instructions for installing the switch into a standard 19-inch rack.
Steps for connecting the switch to AC power and optional redundant power.
Steps for initial login and accessing switch management.
Defines the behavior and meaning of switch status LEDs.
A list of common problems, causes, and recommended actions.
To Next Page