Need help?Do you have a question about the Enterasys 08G20G4-48 and is the answer not in the manual?
General| Speed | 10/100/1000 Mbps |
|---|---|
| Power over Ethernet (PoE) | No |
| Rack Mountable | Yes |
| Jumbo Frame Support | Yes |
| VLANs Supported | 4094 |
| Redundant Power Supply (RPS) Support | Yes |
| Type | Switch |
| Layer | L2/L3 |
| MAC Address Table Size | 32, 000 |
| Dimensions | 4.4 x 44 x 38.1 cm |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20 to 70°C |
| Operating Humidity | 10 to 95% RH (non-condensing) |
| Model | Enterasys 08G20G4-48 |
| Storage Humidity | 10 to 95% RH (non-condensing) |
Covers safety precautions, especially for Class 1 laser transceivers.
Introduces the Enterasys 800-Series Fast/Gigabit Ethernet switches.
Details key capabilities like redundant power, management, and standards.
Notes to follow before starting the switch installation process.
Lists necessary tools for switch installation.
Instructions for safely unpacking the switch and verifying contents.
Steps to connect the switch to an AC power source.
Guides for installing and connecting optional RPS units.
How to establish a console connection for CLI management.
Explains the meaning and behavior of front panel LEDs.
A table listing common problems, causes, and solutions.
To Next Page