Need help?Do you have a question about the Enterasys SecureStack B2 B2G124-48P and is the answer not in the manual?
General| Model | B2G124-48P |
|---|---|
| Type | Managed Switch |
| Ports | 48 |
| Uplink Ports | 4 |
| Power over Ethernet (PoE) | Yes |
| PoE Power Budget | 370W |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 10% to 90% non-condensing |
| Layer | Layer 2 |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| MAC Address Table Size | 16K |
Identifies the intended audience for this installation guide, typically network administrators.
Explains how to effectively navigate and utilize the manual's content for setup and understanding.
Lists other essential manuals and resources for comprehensive switch management.
Explains the symbols, warnings, and notes used to convey important information.
Provides a general introduction to the SecureStack B2 switches, their capabilities, and features.
Details the switch's compliance with IEEE 802.3af for powering devices over Ethernet cables.
Describes how the switch connects to networks using RJ45 ports and Mini-GBICs.
Outlines the methods for managing the switch, including in-band and out-of-band options.
Lists the IEEE and other standards the switch's ports comply with for network operations.
Explains the function of LANVIEW LEDs for monitoring switch and network status.
Provides contact methods for obtaining technical support and assistance.
Specifies the requirements for connecting to a 10BASE-TX Ethernet network segment.
Details the requirements for connecting to a 100BASE-TX Fast Ethernet network segment.
Outlines requirements for 1-Gbps fiber-optic connections using Mini-GBICs.
Specifies requirements for 1-Gbps copper connections using RJ45 ports.
Important notes and notifications before commencing the installation process.
Instructions for installing optional Small Form Pluggable interface modules.
Detailed steps for mounting the switch securely into a standard 19-inch equipment rack.
Guides on connecting multiple switches for stacked operation using specialized cables.
Procedures for connecting the switch to AC power and optional redundant power supplies.
How to establish local management access via the console port using a PC or terminal.
Steps to complete the installation, including initial logon and cable management.
Utilizes LANVIEW diagnostic LEDs to identify and diagnose network and switch problems.
A checklist of common issues, their causes, and recommended actions for resolution.
Instructions on how to use the reset switch to restore default settings or passwords.
Provides detailed physical, environmental, and performance specifications for the switches.
Details the specifications for various Mini-GBIC (SFP) modules supported by the switches.
Technical specifications for the Gigabit Ethernet ports and their compatible Mini-GBICs.
Pinout diagram and information for the DB9 serial console port.
Lists the safety and electromagnetic compatibility standards the product adheres to.
To Next Page