Enterasys SecureStack B2 B2G124-48P - Mini-GBIC Input;Output Specifications

Mini-GBIC Input/Output Specifications
SecureStack B2 Installation Guide A-3
Mini-GBIC Input/Output Specifications
TheMini‐GigabitInterfaceCard(Mini‐GBIC)portinterfaceslotscansupport1‐Gbps
fiber‐opticandcopperconnectionsasdescribedinTable A‐2.TheoptionalMini‐GBICs
arehotswappable.
Redundant Power Supply Input Specifications (supports input from C2RPS-POE only)
Dc Input Voltages -50 Vdc
+12 Vdc
Input Currents 7.5 A maximum at -50 Vdc
10.5 A maximum at +12 Vdc
Environmental
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity 5% to 90% (non-condensing)
Table A-1 Switch Specifications (continued)
Item Specification
Table A-2 Mini-GBIC Input/Output Port Specifications
Item Specification
MGBIC-LC01 Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
MGBIC-LC03 Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
MGBIC-LC09 Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-LX standard LC connector.
MGBIC-MT01 Provides one MT-RJ fiber-optic multi-mode port that is compliant with
the 1000BASE-SX standard MT-RJ connector.
MGBIC-08 Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-ELX standard LC connector.
MGBIC-02 Provides one RJ45 copper connection that is compliant with the
1000BASE-T standard RJ45 connector.