Enterasys SecureStack B2 B2G124-48P User Manual

Connecting AC and PoE Power
3-16 Hardware Installation
C2RPS-PoE Redundant Power System
IfyouareconnectinganoptionalPoEredundantpowersupply(C2RPS‐POE),refertothe
installationinstructionssuppliedwiththeSecureStackC2RPS‐POE.Theswitchis
connectedtoaC2RPS‐POEusingaC2RPS‐POECable.
Ifyouareinstallingtheswitchasastandalonedevice,proceedto“ConnectingtoConsole

PortforLocalManagement”onpage 3‐17.Ifyouareinstallingswitchesinastack
configuration,proceedto“StackInitializationOverview”onpage 3‐16.
Stack Initialization Overview
Whenyouinstallandconnectallthehigh‐speedstackingcablestotheswitchesinthe
stackbeforeapplyingpowertotheswitches,thefollowingoccurs:
•Theswitchthatwillmanage(Manager)thestackisautomaticallyestablishedwithall
otherswitchesestablishedasMemberswitchesinthestack.Whentheswitches
completetheirinitializations,oneoftheswitchesinthestackwillilluminateits
ManagerLED,indicatingthatitisthestackManager.TheManagerLEDoneach
Memberswitchwillbeoff.
•ThehierarchyoftheswitchesthatwillfunctionasbackupManagerisalsodetermined
incasethecurrentManager
malfunctions,ispowereddown,orisdisconnectedfrom
thestack.
•TheConsoleportoneachMemberswitchisdeactivated.OnlytheConsoleportonthe
Managerswitchisactiveforout‐ofbandconfigurationtosettheIPaddress,
password,andotherconfigurationsettings.
OnceyouknowwhichswitchistheManager,
proceedto“ConnectingtoConsolePortfor
LocalManagement”onpage 3‐17.
Caution: The C2RPS-POE power supply does not support non-PoE compliant
SecureStack C2 switches. Do not try to connect the power cable from this C2RPS-POE
power supply to any SecureStack C2 switch that does not have a “P” suffix in the model
name. (Example: C2G124-24.) Otherwise, damage to the device may result.
Precaución: La fuente de poder C2RPS-POE no es compatible con switches
SecureStack C2 que no cumplan con el estándar PoE. No intente conectar el cable de
corriente de esta fuente de poder C2RPS-POE a ningún switch SecureStack C2 que no
tenga el sufijo “P” en el nombre del modelo. (Ejemplo: C2G124-24.) De lo contrario, el
dispositivo puede dañarse.

Enterasys SecureStack B2 B2G124-48P Specifications

General

Brand	Enterasys
Model	SecureStack B2 B2G124-48P
Category	Switch
Language	English