Enthermics EC2060 - How to Manually Reset the Warmer

TROUBLESHOOTING
Blanket Warmer ▪ Operator’s Manual ▪ MN-39929 ▪ Rev 5 ▪ 2/24
28
How to Manually Reset the Warmer
Background In the case of overtemperature, a high limit switch will disable the heating
function. The warmer can be manually reset using the high limit manual reset
button(s) located at the rear of the warmer.
Procedure
To manually reset the warmer, do the following.
Step Action
1. Press the high limit manual reset button(s) /.
.
Result Resume operation of the warmer.

NOTE: If the manual reset warmer button(s) trips again
while the warmer is operating, contact Enthermics for
the authorized service partner in your area.
EC-TS-004975
a