enTourage eDGe - Establishing a Wi-Fi Connection

26
Wi-Fi Connection
NOTE: You must have the wireless switch in the ON position for any wireless communications to
work. The units ship from the factory with the switch in the OFF position. The switch is located on the
top of the unit. Slide it toward the SIM card slot.
NOTE: This is an 802.11B/G device. If your wireless router is an 802.11N router, make sure it is
conguredtoworkwithaB/Gdevice.SeeWi-FiSettingsforalistofthesecuritytypessupported.
To set up a wireless connection for your enTourage eDGe:
1. Go to the home screen.
2. On the home screen menu select the applications menu on the navigation
bar. The applications menu opens. On the navigation bar at the bottom of the screen, select the
shortcut for Networking.
3. On the Wi-Fi settings page, choose Add Wi-Fi network. Enter the values for your wireless
network. Contact your wireless network administrator for details.
NOTE: You can have the enTourage eDGe automatically notify you when an open wireless con-
nectionisavailable.OntheWi-Fisettingspage,makesurethatNetworknoticationischecked.
To connect to an existing WiFi Network:
1. Open the applications menu and select the Networking shortcut.
2. Select Wi-Fi settings.
3. Select the Wi-Fi network to connect.
4. Select the checkbox next to Wi-Fi to turn on the Wi-Fi connection.
To delete an existing Wi-Fi connection:
1. Select Settings on the home screen.
2. Select Wi-Fi settings.
3. Select the Wi-Fi network to delete.
4. Select Forget on the popup menu.
Return to Contents