enTourage eDGe - Wired Network Connection (Ethernet)

28
Connect your enTourage eDGe to a Wired Local Area Network
You can use the USB port to connect to a wired LAN using a USB-to-Ethernet adaptor.
See the acceptable USB-to-Ethernet adaptors on the accessories page.
1.Checkyournetworkcongurationsettingsorcontactyournetworkadministratorfordetailsonaddingadevice
to your LAN network.
2. Plug the USB-to-Ethernet adaptor in to the USB port on the enTourage eDGe.
3. Connect to the local area network using the Ethernet adaptor.
If you need to use a static IP:
1. Go to the home screen and open the applications menu.
2. Select Settings.
3. On the Settings menu, choose Network controls.
4. On the Network controls menu, choose Ethernet settings.
5. On the Ethernet settings, select the checkbox next to Use static IP. Enter the values for the IP address, Net-
mask, Gateway, and DNS1 and DNS2. See your network administrator for these values if you do not know them.
Return to Contents