29
IP1951EN - 2014-10-06
Output
Value /
Accessories
Description
BAT
2 x 12 V / 1.2 Ah
Anti-panic battery kit.
With the mains power supply off, with an alarm condition
(alarm appears on the display with 5 acoustic signals),
the automation performs an opening operation at low speed
unless in NIGHT-TIME CLOSURE mode.
In NIGHT-TIME CLOSURE mode, with the mains power sup-
ply off, the automation goes into an alarm condition (alarm
appears on the display with 5 acoustic signals) without
performing an opening operation.
To charge the batteries, connect the mains power and the
battery kit at least 30 minutes before starting the system.
WARNING: connect batteries, as described on pages 24 and
25.
to allow charging, the battery kit must be connected to the
control panel at all times. Periodically check the efficiency
of the battery kit.
-
LK
+
-
AUX
24 V 1 A
24 V 200 mA
Bistable blocking device. Bistable blocking device power
supply output.
WARNING: connect block auxiliary coil to AUX terminals, as
described on pages 24 and 25.
To Next Page
Loading...
Need help?
General
