28
IP2160EN - 2017-04-12
Contents
Key
Subject Page
1. General safety precautions 29
General safety precautions for the user 30
2. Declaration of incorporation of partly completed machinery 31
2.1 Machinery Directive 31
3. Technical specifications 32
3.1 Operating instructions 33
4. Standard installation 34
5. Dimensions 35
6. Main components 35
7. Installation 36
7.1 Preliminary checks 36
7.2 Base plate position 37
7.3 Gearmotor installation 38
7.4 Rack installation 39
7.5 Operation with encoder 40
7.6 Magnetic limit switch installation and adjustment 40
7.7 Chain drive kit installation 41
8. Electrical connections 43
8.1 Installation of internal photocell 44
9. Routine maintenance plan 44
Operating instructions 45
i
This symbol indicates instructions or notes regarding safety, to which special atten-
tion must be paid.
This symbol indicates useful information for the correct functioning of the product.
All the rights concerning this material are the exclusive property of Entrematic Group AB.
Although the contents of this publication have been drawn up with the greatest care, Entrematic Group AB
cannot be held responsible in any way for any damage caused by mistakes or omissions in this publication.
We reserve the right to make changes without prior notice.
Copying, scanning and changing in any way are expressly forbidden unless authorised in writing by Entrematic
Group AB.
To Next Page
Loading...
Need help?
General
