Envertech EVT2000 User Manual

1
1. Important Safety Information
1.1 Read it First
This manual contains important instructions for the installation and maintenance
of the EVT2000 microinverter.
To reduce the risk of electrical shock, and to ensure safe installation and
operation of the microinverter, the following safety symbols appear throughout
this document to indicate dangerous conditions and important safety
instructions.
1.2 Safety Instructions
Do not use Envertech equipment in a manner not specified by the
manufacturer. Doing so may cause death or injury to persons, or damage to
equipment.
Be aware that only qualified personnel should install or replace the Envertech
microinverters and the cables and accessories.
Do not attempt to repair the Envertech microinverter; it contains no user-
serviceable parts. If it fails, contact Envertech customer service to start the
replacement process. Tampering with or opening the Envertech microinverter
will void the warranty.
If the AC cable on the microinverter is damaged or broken, do not install the
unit.
Before installing or using the Envertech microinverter, read all instructions and
cautionary markings in the technical description and on the Envertech
microinverter system and the PV equipment.
Connect the Envertech microinverter to the utility grid only after you have
completed all installation procedures and received approval from the electric
utility company.
Please be kindly note that the Envertech microinverter itself is a heat sink.
Under normal operating conditions, its temperature is 20°C above ambient, but
under extreme conditions, the microinverter can reach a temperature of 80°C.
Do n
ot disconnect the PV module from the Envertech microinverter without
rusty disconnecting AC power.
2. Envertech Microinverter System
The
Envertech microinverter system is an on-grid microinverter system with
world-top-class technology. This manual gave details about the safe installation
and operation of the Envertech microinverter.
The three key elements of an Envertech microinverter system include:
EVT2000 microinverter: Converting the DC of the PV module into AC
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, can result in death or serious injury or
moderate injury.
NOTICE indicates a situation that can result in property
damage, if not avoided.

Envertech EVT2000 Specifications

General

Brand	Envertech
Model	EVT2000
Category	Inverter
Language	English