ENVO D50 | ST50 EBIKE MANUAL | VERSION 1.0 24
4.5.3. LAMP AND FRONT FENDER MOUNTING
• Remove the Allen bolt Figure 4I
• Place the fender behind the fork bridge, and screw it into
place
• Align Fender stay mount to the fork, use an allen key to
fasten the screw Figure 4J
• Repeat steps for the other side
4.5.4. FRONT LIGHT
• The front light will come assembled on the handlebar,
use the allen key to fasten it to the handlbar as shown in
Figure 4K
Figure 4I
Figure 4J
Figure 4N
To Next Page
Loading...
