EOS Converge - Controls and Functions

To Next Page

To Previous Page

English

Converge Wireless Receiver

Controls and Functions

Function Buttons

When the Eos Converge Transmitter is connected to a computer, you can use the buttons on

the Converge Wireless Receiver to control play/pause and track forward/back on iTunes and

many other computer based music player programs.

Note: feature buttons cannot be used to control an iPod or other device that is connected via

the AUX input; nor can they be used to control streaming Internet radio stations.

Antenna LED Indicator Light

The antenna on the Receiver is equipped with a blue LED that tells the operational status.

LED on solid = power on, linked with Converge Transmitter.•

LED on blinking = power on, not linked with Converge Transmitter. •

Note: If there is no connection within one minute, the unit will enter a sleep mode and turn o

the amplier and the antenna LED. The unit will continue to check for a wireless connection

and will automatically connect with the Converge Transmitter signal as soon as it is detected.

PLAY/PAUSE

PREVIOUS TRACK NEXT TRACK