22
English
Range Extender
The Range Extender Switch, located on the bottom of the Converge Transmitter, allows you to
increase the eective range of the Eos Wireless System. Use this button only if you are having
diculty linking up your Wireless Receivers/Speakers.
About Range Extender
To maintain a solid, interference free link, the Eos system incorporates an advanced proprietary
error correction scheme. Error correction is done by creating a slight delay between the
Converge Transmitter and Wireless Speaker. Using this delay, Eos can conrm that the audio
packets arrive at the Wireless Speaker/receiver. If the audio packet is not received, the Eos
Converge Transmitter can resend it. Eos’ default delay (Range Extender O) is 20ms.
Turning on the Range Extender Switch increases the delay to 64ms. The increased delay allows
Eos to resend more audio packets due to distance from the Converge Transmitter or ambient
interference.
Note: Due to the 64ms delay, if an Eos Converge Transmitter and Wireless Speaker are in the same
room, a slight “echo” eect is apparent.
Using Your Eos System
Recycling Information
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead please deliver it to the applicable collection point for
the recycling of electrical and electronic equipment. By recycling this product correctly,
you will help conserve natural resources and prevent potential negative environmental
consequences. For more detailed information about recycling of this product, please
contact your local city oce, your household waste disposal service or the shop where you
purchased the product.
To Next Page
Loading...