EOS Converge - About the Amplified Converge Wireless Receiver; Powering up Your Amplified Converge Wireless Receiver; Speaker Connection

16
English
Amplified Converge Wireless Receiver
About the Amplified Converge Wireless Receiver
The Eos Converge Amplied Wireless Receiver is designed to be used as a stand-alone receiver
in conjunction with bookshelf type speakers. Optionally, a powered sub-woofer can be con-
nected to the receiver.
Powering up your Converge Wireless Receiver
Connect power supply to jack marked DC24V1.
To power on the Amplied Converge Wireless Receiver, press the volume knob. The 2.
ring around the volume knob will illuminate as will the LED on the antenna mast.
Speaker Connection
The diagram below shows the connection using bookshelf speakers. For extra bass, a powered
subwoofer can be connected to the Amplied Converge Wireless Receiver.
RIGHT SPEAKER
POWERED
SUBWOOFER
LEFT SPEAKER
AUDIO IN
AMPLIFIED RECEIVER