19
English
Controls and Functions
Antenna LED Indicator Light
The antenna on the Receiver is equipped with a blue LED that tells the operational status.
LED on solid = power on, linked with Converge Transmitter.•
LED on blinking = power on, not linked with Converge Transmitter. •
Note: If there is no connection within one minute, the unit will enter a sleep mode and turn o
the amplier and the antenna LED. The unit will continue to check for a wireless connection
and will automatically connect with the Converge Transmitter signal as soon as it is detected.
Amplified Converge Wireless Receiver
To Next Page
Loading...