ep WPL201 - Emergency Reverse Switch

REV. 09/2020
B17
Emergency reverse switch
To protect the driver from any risk of being trapped between an obstacle and the machine,the
end of the tiller is tted with a emergency emergency reverse switch.
Once the safety reverser is triggered, the equipment will stop immediately, then slowly move
back in the direction of the fork.
Reverse braking
Braking can be accomplished by changing the direction of travel.
Press the drive switch in the opposite direction until the truck comes to a stop,
then release the drive switch.
Open the drive switch; if the drive switch cannot quickly return to the initial position or resets
veryslowly,identifythecauseandrectifythefault.
CAUTION
Regenerative braking
Release the drive switch. The drive switch will automatically return to the initial position and the
vehicle will begin to enter the regenerative braking state. When it decelerates to <1 km/h, the
electromagnetic brake will bring the motor to a stop.
EPL151/EPL154/EPL185
WPL201
HPL152