16 | RT Series True Online UPS
Mode Setting
Bypass Mode Setting
Enable or disable Bypass function. You may choose
the following two options:
ON: Bypass enable.
OFF (default): Bypass disable.
ECO Mode Setting
Enable or disable ECO function. You may choose the
following two options:
ON: ECO mode enable.
OFF (default): ECO mode disable.
EP Setting
This setting is mainly used for some special units.
Users are not advised to operate it. After starting EP
mode, output voltage display will have nine option
(240V, 230V, 220V, 208V, 100V, 110V, 115V, 120V,
127V) but the voltage output is still four option (240V,
230V, 220V, 208V). You can choose to shield the LCD
display capacity values whens starting up, you can
choose whether UPS go directly to the Line mode or
bypass mode when connect mains and automatically
start up.
AUO Setting
EP setting ON required.
AUO setting only can be set in Stdby mode or Bypass
mode. You may choose the following two options:
ON: UPS will start up automatically and works in Line
mode when connect mains.
OFF: UPS won’t start up automatically when connect
mains except EOD, it will work in standby or bypass
mode (Default).
To Next Page
Loading...
