Need help?Do you have a question about the Epcom RT Series and is the answer not in the manual?
General safety precautions for operating the UPS unit.
Safety guidelines for handling UPS batteries.
Detailed technical specifications for the RT Series UPS models.
Description of the UPS front panel components and layout.
Description of the UPS rear panel connectors and ports.
Procedures for unpacking and inspecting the UPS upon receipt.
Guidelines and precautions for installing the UPS in its operating environment.
How to connect UPS output to loads and external battery banks.
Details on RS232 and USB ports for UPS monitoring.
Explanation of the Emergency Power Off (EPO) port functionality.
Information on installing SNMP or Dry Contacts cards.
How to use the front panel buttons to control the UPS functions.
Explanation of the UPS LCD display icons and their meanings.
Details on UPS status icons and digital display information.
Procedures for turning the UPS on and off.
How to configure output voltage and low battery thresholds.
Configuration for frequency converter and output frequency.
Settings for Bypass, ECO, EP, and AUO modes.
How to check UPS parameters like input, output, load, battery, and temperature.
Explanation of different UPS operating modes.
List of fault codes, their types, and bypass output status.
Correlation between working status, LCD messages, and alarm beeps.
How alarm codes are displayed on the LCD and their meanings.
Common UPS problems, their potential causes, and troubleshooting steps for specific fault codes.
Further troubleshooting for common UPS issues like input faults, fan faults, and startup failures.
General| Category | UPS |
|---|---|
| Model | RT Series |
| Frequency | 50/60 Hz |
| Input Voltage | 230V |
| Output Voltage | 230V |
| Waveform | Sine Wave |
| Communication | USB, RS-232 |
| Battery Type | Sealed Lead Acid |
| Backup Time | Varies by model |
| Protection | Overload, Short Circuit |
| Communication Interface | USB, RS232 |
| Form Factor | Tower |
To Next Page
