2) Wiring diagram of level trigger mode
(Note: Dry contact trigger mode can be configured on the PC, can configure level trigger or
LINE 3 as a sound source, after the emergency trigger can not restore the original play state.)
5.3 Local sound source play
Press the key selection button to select the source channel. The corresponding indicator indicates
the currently selected source. When LINE7 indicator turn on means select MP3.
1. Sound source play of each zone
a. The current selected audio source for MP3, turn on according zone can play MP3 sound source,
press all zone button, all zones will play MP3. When you turn on the different zone, the zone
status light is normally displayed in green.
b. When the current source is selected as background music, press zone 1 ~ 8 button to turn on or
turn off current zone.
Through the MONITOR button to turn on or off the monitoring function, ensure monitor volume,
main volume must be moderate, to ensure that at least one zone is turn.
To Next Page
Loading...